Cabin Lighting

Full Color (Mood) Lighting

Bruce sets the standard for enhancing the cabin ambience for passengers with mood lighting featuring XLUME High Brightness LED technology.

Full-Color Dynamic LED is our latest Third Generation (GEN 3) LED Cabin Lighting Systems to replace the current fluorescent equipment. There are options to use existing aircraft lighting controls or the optional Bruce Mood Lighting Controller, which offers up to 22 unique control buttons that can execute basic or more complex Scenarios with many different colors, timings and transitions.  Lighting colors and scenes are customer selected prior to installation and can be further modified by the customer after the initial installation using an intuitive Scenario development software application.

Bruce Aerospace Mood Lighting systems employ the latest High Brightness (H.B.) LED technology, providing high level light output which equals or exceeds the light output levels of OEM fluorescent lighting systems. High quality H.B. LED technology has several advantages over lower output, plastic encapsulated LED-based lighting systems:

• Extremely long usable lifespan
• A minimum of 60,000 hours of usage with no color shift or light output degradation
• Close color matching
• High thermal efficiency
• High output and maximum color saturation
• Colored light presentations are not washed out by ambient light during daytime operation

Bi-Color Lighting

Bi-color LED lighting provides some basic mood lighting capability without the need of an additional lighting control system

The bi-color system (white and one other color) can be programmed to execute unique color mix selections corresponding to each flight attendant panel switch position (bright, mid-dim, low-dim, for example). The transition times between settings are customizable. The ceiling lights are equipped with LED night lights that operate when the “night” position is selected.

When the cabin lighting is switched to the dim mode of operation the bi-color lighting system transitions to an alternative color. The customer can select from three color temperatures for the primary white lighting presentation (warm white, neutral white, or cool white) and a wide variety of color choices for the secondary lighting channel on bi-color systems including, royal blue, normal blue, and amber. Bi-color systems can also employ a mixed array of cool white and warm white LED emitters, providing a tunable white temperature lighting system.

White Only

The all-white LED system can be programmed to execute unique levels of illumination

This system can be set up with levels of illumination corresponding to each flight attendant panel switch position (bright, mid-dim, low-dim, for example). The transition times between settings are customizable. The ceiling lights are equipped with LED night lights that operate when the “night” position is selected. The customer can select from three color temperatures for the primary white lighting presentation (warm white, neutral white, or cool white).